Multilayer simulations for accurate geological interpretations of SHARAD radargrams

SHARAD (SHAllow RADar) is a nadir-looking Synthetic Aperture Ground Penetrating Radar on board NASA's 2005 Mars Reconnaissance Orbiter. There are three main characteristics that define the performance of this instrument: ground penetration (due to the operational frequency, the observed echoes can be related to reflections from surface or subsurface), spaceborne operation (the first reflection does not necessarily correspond to the nadir reflection), and nadir looking SAR (there will always be left/right ambiguities). All this implies that there will be surface/subsurface range ambiguity and the geological interpretation of the radargrams cannot be straightforward. In order to avoid data misinterpretation, a simulator of SHARAD’s expected response for a given observation geometry and topography is needed. Simulations can take into account all surface/subsurface reflections in order to identify common families of ambiguities and facilitate the interpretation. In this work we present SHARSIM (SHARAD Radargram SIMulator), a software tool designed to simulate SHARAD radargrams taking as inputs Mars surface information and hypothetical subsurface structure. Its performance is analyzed by investigating typical artifacts and by a direct comparison with real radargrams. We show that SHARSIM simulations can help to discern between artifacts and real subsurface features in order to make accurate geological interpretations.     

Characterization of the atmosphere above a site for millimeter wave astronomy

The Sardinia Radio Telescope (SRT) is a challeging scientific project managed by the National Institute for Astrophysics (INAF), it is being developed at 30 km North of the city of Cagliari, Italy. The goal of the SRT project is to build a general purpose, fully steerable, 64 m diameter radio telescope, capable of operating with high efficiency in the centimeter and millimeter frequency range (0.3–100 GHz). In portions of this frequency range, especially towards the high end, astronomical observations can be heavily deteriorated by non-optimal atmospheric conditions, especially by water vapor content. The water molecule permanent electric dipole in fact, leads to pressure broadened rotational transitions around the 22.23 GHz spectral line. Furthermore, water vapor’s continuum absorption and emission may influence higher frequency observations too. To a lower degree, cloud liquid black body radiation can also affect centimeter and millimeter observations. In addition to this, inhomogeneities in water vapor distributions can cause signal phase errors which introduce a great amount of uncertainty to VLBI mode observations. The Astronomical Observatory of Cagliari (OA-CA) has obtained historical timeseries of radiosonde profiles conducted at the airport of Cagliari. Through the radiosonde measurements and an appropriate radiative transfer model, we have performed a statistical analysis of the SRT site’s atmosphere which accounts for atmospheric opacity at different frequencies, integrated water vapor (IWV), integrated liquid water (ILW) and cloud cover distributions during the year. This will help to investigate in which period of the year astronomical observations at different frequencies should be performed preferably. The results show that, at the SRT site, K-band astronomical observations are possible all year round, the median opacity at 22.23 GHz is 0.10 Np in the winter (Dec-Jan-Feb) and 0.16 Np in the summer (Jun-Jul-Aug). Integrated water vapor during winter months ranges, on average, between 7 and 15 mm. Cloud cover is usually not present for more than 36% of the time during the year. The atmospheric opacity study indicates that observations at higher frequencies (50–100 GHz) may be performed usefully: the median opacity at 100 GHz is usually below or equal to 0.2 Np in the period that ranges from January to April.     

Chemical Reduction of Hexavalent Chromium Present in Contaminated Soil using a Packed-bed Column Reactor

Soil samples extracted from a contaminated landfill with hexavalent chromium, Cr(VI), were treated in a packed-bed column reactor applying different reductant solutions under controlled flow conditions. In all cases, the kinetic study concerning removal of Cr(VI) from packed soil revealed the overall process (leaching and redox reaction) is described by pseudo-first order kinetics. The complexity of the process taking place in non-isotropic medium (packed soil) was evidenced by dependence of the overall pseudo-first order kinetic rate constant, k*, on treatment time, volumetric flow rate, and composition and concentration of the reductant solution. A phenomenological equation was proposed in order to represent k* in non-ideal conditions. The comparative study concerning the use of different reductants revealed application of ferrous sulphate, Fe(II), under flow conditions furnished the best results, since in this case the redox process reached a considerable extent and the reduced chromium, Cr(III), was immobilized in packed soil as an insoluble mixed compound.     

Pier scour monitoring system by bed-level image tracking

A scour monitoring system with a micro camera tracking the bed-level images is proposed in this study.Two image recognition algorithms have been developed to support the bed-level image tracking approach.Through the laboratory experiments of pier scour,this study demonstrates that the proposed system is able to accurately monitor the scour-depth evolution in real time.In addition,five commonly-used temporal scour models are employed to simulate scour-depth evolution and their results are compared with monitoring data.In general,the results indicate that the proposed scour monitoring system has the potential for further applications in the field.     

Evolution of fluid geochemistry at the Turrialba volcano (Costa Rica) from 1998 to 2008

Turrialba (10°02′N, 83°45′W) is a 3,349-m high stratovolcano belonging to the Holocene “Cordillera Central” volcanic belt of Costa Rica. The summit consists of three EW-oriented craters (East, Central, and West). Since its last eruptive phase (1864–1866), the Central and West craters have displayed modest fumarolic activity, with outlet temperatures clustering around 90°C. In 2001, seismic swarms, ground deformation, and increasing fumarolic activity occurred. From 2005 to 2008, new fumarolic vents opened between and within the Central and West craters, and along the western and southwestern outer flanks of the volcanic edifice. These physical changes were accompanied by a drastic modification in the gas chemistry that can be divided in three stages: (1) hydrothermal (from 1998 to autumn 2001), characterized by the presence of H₂O, CO₂, H₂S, and, to a very minor extent, HCl and HF; (2) hydrothermal/magmatic (autumn 2001–2007), with the appearance of SO₂ and a significant increase of HCl and HF; and (3) magmatic-dominated (2007–2008), characterized by increased SO₂ content, SO₂/H₂S > 100, and temperatures up to 282°C. Accordingly, gas equilibrium in the CO₂-CH₄-H₂ system suggests a progressive evolution of the deep fluid reservoir toward higher temperatures and more oxidizing conditions. The chemical–physical modifications of Turrialba in the last decade can be interpreted as part of a cyclic mechanism controlling the balance between the hydrothermal and the magmatic systems. Nevertheless, the risk of rejuvenation of the volcanic activity cannot be excluded, and an appropriate seismic, ground deformation, and geochemical monitoring program is highly recommended. Turrialba lies at a distance of 35 and 15 km from San José and Cartago, respectively, the two largest cities in Costa Rica.     

Biochemical and microbial features of shallow marine sediments along the Terra Nova Bay (Ross Sea,Antarctica)

Shallow marine sediments were collected from seven stations (three of which located at Gerlache Inlet, two at Tethys Bay, one at Adelie Cove and one just beneath the Italian Research Base) along the Terra Nova Bay coast (Ross Sea, Antarctica). Their chemical, biochemical and microbiological properties were studied in order to provide further insights in the knowledge of this Antarctic benthic ecosystem. Overall, the organic carbon (OC) represented the major fraction of total carbon (TC) and displayed concentrations similar to or slightly lower than those previously measured in Antarctic bottom sediments. The biopolymeric carbon within OC ranged from 4.1% to 19.9% and showed a wide trophic range (65–834 μg g⁻¹ d.w.). Proteins (PRT) represented on average the main biochemical class contributing to labile organic carbon, followed by lipids (LIP) and carbohydrates (CHO). The activity of aminopeptidase, β-d-glucosidase, alkaline phosphatase and esterase was checked, giving the highest values at Tethys Bay and at the deepest water sediments. The principal component analysis, which was computed considering physical, chemical (elemental and biochemical sedimentary composition) and microbiological parameters (including bacterial abundance, ectoenzymatic activities, T-RFs richness and diversity indices), allowed to obtain two main clusters (“Tethys Bay” and “other stations”). Based on data obtained, two representative 16S rRNA clone libraries using samples from Tethys Bay and Gerlache Inlet were constructed. The sequences of 171 clones were compared to those available in public databases to determine their approximate phylogenetic affiliations. Both aerobic and anaerobic bacteria were disclosed, with the majority of them affiliated with the Gamma- and Deltaproteobacteria, Bacteroidetes and Acidobacteria. The occurrence of strictly anaerobic bacteria suggests that sediments might also undergo anoxic conditions that, in turn, could favor the accumulation of PRT in respect to CHO, assuming that fermentation of amino acids is slower than that of sugars from decomposing polysaccharides.     

Electrochemical Ozone Production as an Environmentally Friendly Technology for Water Treatment

Perspectives, advances and environmental aspects concerning electrochemical ozone production applied to water purification are presented and discussed in relation to the conventional corona process (silent electric discharge). Ozone generated using a laboratory‐made electrochemical reactor was applied for the discoloration/degradation of dyes used in the Brazilian textile industry and for degradation of endocrine disruptors. A constant ozone load of 0.35 ± 0.02 g/h was used throughout. The study, concerning color removal from dye solutions, revealed that total discoloration is rapidly achieved. The degradation rate of the textile dyes evaluated by TOC is little affected by the dye composition and considerably influenced by the pH and ozonation time. Analysis of the COD/TOC‐ratio indicates that ozonation increases oxidation feasibility of the organic matter (dye by‐products) when compared to the original compounds. Ozonation of mixed aqueous solutions containing different endocrine disruptors revealed these compounds are totally degraded with a very high removal rate.     

Neo-deterministic seismic hazard scenarios for India—a preventive tool for disaster mitigation

Current computational resources and physical knowledge of the seismic wave generation and propagation processes allow for reliable numerical and analytical models of waveform generation and propagation. From the simulation of ground motion, it is easy to extract the desired earthquake hazard parameters. Accordingly, a scenario-based approach to seismic hazard assessment has been developed, namely the neo-deterministic seismic hazard assessment (NDSHA), which allows for a wide range of possible seismic sources to be used in the definition of reliable scenarios by means of realistic waveforms modelling. Such reliable and comprehensive characterization of expected earthquake ground motion is essential to improve building codes, particularly for the protection of critical infrastructures and for land use planning. Parvez et al. (Geophys J Int 155:489–508, 2003) published the first ever neo-deterministic seismic hazard map of India by computing synthetic seismograms with input data set consisting of structural models, seismogenic zones, focal mechanisms and earthquake catalogues. As described in Panza et al. (Adv Geophys 53:93–165, 2012), the NDSHA methodology evolved with respect to the original formulation used by Parvez et al. (Geophys J Int 155:489–508, 2003): the computer codes were improved to better fit the need of producing realistic ground shaking maps and ground shaking scenarios, at different scale levels, exploiting the most significant pertinent progresses in data acquisition and modelling. Accordingly, the present study supplies a revised NDSHA map for India. The seismic hazard, expressed in terms of maximum displacement (Dmax), maximum velocity (Vmax) and design ground acceleration (DGA), has been extracted from the synthetic signals and mapped on a regular grid over the studied territory.     

Large roots dominate the contribution of trees to slope stability

Tree roots provide surface erosion protection and improve slope stability through highly complex interactions with the soil due to the nature of root systems. Root reinforcement estimation is usually performed by in situ pullout tests, in which roots are pulled out of the soil to reliably estimate the root strength of compact soils. However, this test is not suitable for the scenario where a soil progressively fails in a series of slump blocks – for example, in unsupported soils near streambanks and road cuts where the soil has no compressive resistance at the base of the hillslope. The scenario where a soil is unsupported on its downslope extent and progressively deforms at a slow strain rate has received little attention, and we are unaware of any study on root reinforcement that estimates the additional strength provided by roots in this situation. We therefore designed two complementary laboratory experiments to compare the force required to pull the root out. The results indicate that the force required to pull out roots is reduced by up to 50% when the soil fails as slump blocks compared to pullout tests. We also found that, for slump block failure, roots had a higher tendency to slip than to break, showing the importance of active earth pressure on root reinforcement behaviour, which contributes to reduced friction between soil and roots. These results were then scaled up to a full tree and tree stand using the root bundle and field-measured spatial distributions of root density. Although effects on the force mobilized in small roots can be relevant, small roots have virtually no effect on root reinforcement at the tree or stand scale on hillslopes. When root distribution has a wide range of diameters, the root reinforcement results are controlled by large roots, which hold much more force than small roots. © 2019 John Wiley & Sons, Ltd.